6.022 141 294 81 Converted to 32 Bit Single Precision IEEE 754 Binary Floating Point Representation Standard

Convert decimal 6.022 141 294 81(10) to 32 bit single precision IEEE 754 binary floating point representation standard (1 bit for sign, 8 bits for exponent, 23 bits for mantissa)

What are the steps to convert decimal number
6.022 141 294 81(10) to 32 bit single precision IEEE 754 binary floating point representation (1 bit for sign, 8 bits for exponent, 23 bits for mantissa)

1. First, convert to binary (in base 2) the integer part: 6.
Divide the number repeatedly by 2.

Keep track of each remainder.

We stop when we get a quotient that is equal to zero.


  • division = quotient + remainder;
  • 6 ÷ 2 = 3 + 0;
  • 3 ÷ 2 = 1 + 1;
  • 1 ÷ 2 = 0 + 1;

2. Construct the base 2 representation of the integer part of the number.

Take all the remainders starting from the bottom of the list constructed above.

6(10) =

110(2)


3. Convert to binary (base 2) the fractional part: 0.022 141 294 81.

Multiply it repeatedly by 2.

Keep track of each integer part of the results.

Stop when we get a fractional part that is equal to zero.


  • #) multiplying = integer + fractional part;
  • 1) 0.022 141 294 81 × 2 = 0 + 0.044 282 589 62;
  • 2) 0.044 282 589 62 × 2 = 0 + 0.088 565 179 24;
  • 3) 0.088 565 179 24 × 2 = 0 + 0.177 130 358 48;
  • 4) 0.177 130 358 48 × 2 = 0 + 0.354 260 716 96;
  • 5) 0.354 260 716 96 × 2 = 0 + 0.708 521 433 92;
  • 6) 0.708 521 433 92 × 2 = 1 + 0.417 042 867 84;
  • 7) 0.417 042 867 84 × 2 = 0 + 0.834 085 735 68;
  • 8) 0.834 085 735 68 × 2 = 1 + 0.668 171 471 36;
  • 9) 0.668 171 471 36 × 2 = 1 + 0.336 342 942 72;
  • 10) 0.336 342 942 72 × 2 = 0 + 0.672 685 885 44;
  • 11) 0.672 685 885 44 × 2 = 1 + 0.345 371 770 88;
  • 12) 0.345 371 770 88 × 2 = 0 + 0.690 743 541 76;
  • 13) 0.690 743 541 76 × 2 = 1 + 0.381 487 083 52;
  • 14) 0.381 487 083 52 × 2 = 0 + 0.762 974 167 04;
  • 15) 0.762 974 167 04 × 2 = 1 + 0.525 948 334 08;
  • 16) 0.525 948 334 08 × 2 = 1 + 0.051 896 668 16;
  • 17) 0.051 896 668 16 × 2 = 0 + 0.103 793 336 32;
  • 18) 0.103 793 336 32 × 2 = 0 + 0.207 586 672 64;
  • 19) 0.207 586 672 64 × 2 = 0 + 0.415 173 345 28;
  • 20) 0.415 173 345 28 × 2 = 0 + 0.830 346 690 56;
  • 21) 0.830 346 690 56 × 2 = 1 + 0.660 693 381 12;
  • 22) 0.660 693 381 12 × 2 = 1 + 0.321 386 762 24;
  • 23) 0.321 386 762 24 × 2 = 0 + 0.642 773 524 48;
  • 24) 0.642 773 524 48 × 2 = 1 + 0.285 547 048 96;

We didn't get any fractional part that was equal to zero. But we had enough iterations (over Mantissa limit) and at least one integer that was different from zero => FULL STOP (Losing precision - the converted number we get in the end will be just a very good approximation of the initial one).


4. Construct the base 2 representation of the fractional part of the number.

Take all the integer parts of the multiplying operations, starting from the top of the constructed list above:


0.022 141 294 81(10) =

0.0000 0101 1010 1011 0000 1101(2)

5. Positive number before normalization:

6.022 141 294 81(10) =

110.0000 0101 1010 1011 0000 1101(2)

6. Normalize the binary representation of the number.

Shift the decimal mark 2 positions to the left, so that only one non zero digit remains to the left of it:


6.022 141 294 81(10) =

110.0000 0101 1010 1011 0000 1101(2) =

110.0000 0101 1010 1011 0000 1101(2) × 20 =

1.1000 0001 0110 1010 1100 0011 01(2) × 22


7. Up to this moment, there are the following elements that would feed into the 32 bit single precision IEEE 754 binary floating point representation:

Sign 0 (a positive number)

Exponent (unadjusted): 2

Mantissa (not normalized):
1.1000 0001 0110 1010 1100 0011 01


8. Adjust the exponent.

Use the 8 bit excess/bias notation:


Exponent (adjusted) =

Exponent (unadjusted) + 2(8-1) - 1 =

2 + 2(8-1) - 1 =

(2 + 127)(10) =

129(10)


9. Convert the adjusted exponent from the decimal (base 10) to 8 bit binary.

Use the same technique of repeatedly dividing by 2:


  • division = quotient + remainder;
  • 129 ÷ 2 = 64 + 1;
  • 64 ÷ 2 = 32 + 0;
  • 32 ÷ 2 = 16 + 0;
  • 16 ÷ 2 = 8 + 0;
  • 8 ÷ 2 = 4 + 0;
  • 4 ÷ 2 = 2 + 0;
  • 2 ÷ 2 = 1 + 0;
  • 1 ÷ 2 = 0 + 1;

10. Construct the base 2 representation of the adjusted exponent.

Take all the remainders starting from the bottom of the list constructed above.


Exponent (adjusted) =

129(10) =

1000 0001(2)


11. Normalize the mantissa.

a) Remove the leading (the leftmost) bit, since it's allways 1, and the decimal point, if the case.

b) Adjust its length to 23 bits, by removing the excess bits, from the right (if any of the excess bits is set on 1, we are losing precision...).


Mantissa (normalized) =

1. 100 0000 1011 0101 0110 0001 101 =

100 0000 1011 0101 0110 0001


12. The three elements that make up the number's 32 bit single precision IEEE 754 binary floating point representation:

Sign (1 bit) =
0 (a positive number)

Exponent (8 bits) =
1000 0001

Mantissa (23 bits) =
100 0000 1011 0101 0110 0001


Decimal number 6.022 141 294 81 converted to 32 bit single precision IEEE 754 binary floating point representation:

0 - 1000 0001 - 100 0000 1011 0101 0110 0001

Share

» Convert decimal 6.022 141 295 1 to 32 bit single precision IEEE 754 binary floating point representation standard

» Calculations Performed by Our Visitors: Decimal Numbers Converted to 32 Bit Single Precision IEEE 754 Binary Floating Point Representation Standard. Data organized on a Monthly Basis

» Month 01, 2026 [January]: Decimal Numbers Converted to 32 Bit Single Precision IEEE 754 Binary Floating Point Representation Standard. Calculations performed during the month of: January - by our visitors

How to convert decimal numbers from base ten to 32 bit single precision IEEE 754 binary floating point standard

Follow the steps below to convert a base 10 decimal number to 32 bit single precision IEEE 754 binary floating point:

  • 1. If the number to be converted is negative, start with its the positive version.
  • 2. First convert the integer part. Divide repeatedly by 2 the base ten positive representation of the integer number that is to be converted to binary, until we get a quotient that is equal to zero, keeping track of each remainder.
  • 3. Construct the base 2 representation of the positive integer part of the number, by taking all the remainders of the previous dividing operations, starting from the bottom of the list constructed above. Thus, the last remainder of the divisions becomes the first symbol (the leftmost) of the base two number, while the first remainder becomes the last symbol (the rightmost).
  • 4. Then convert the fractional part. Multiply the number repeatedly by 2, until we get a fractional part that is equal to zero, keeping track of each integer part of the results.
  • 5. Construct the base 2 representation of the fractional part of the number by taking all the integer parts of the previous multiplying operations, starting from the top of the constructed list above (they should appear in the binary representation, from left to right, in the order they have been calculated).
  • 6. Normalize the binary representation of the number, by shifting the decimal point (or if you prefer, the decimal mark) "n" positions either to the left or to the right, so that only one non zero digit remains to the left of the decimal point.
  • 7. Adjust the exponent in 8 bit excess/bias notation and then convert it from decimal (base 10) to 8 bit binary, by using the same technique of repeatedly dividing by 2, as shown above:
    Exponent (adjusted) = Exponent (unadjusted) + 2(8-1) - 1
  • 8. Normalize mantissa, remove the leading (leftmost) bit, since it's allways '1' (and the decimal sign if the case) and adjust its length to 23 bits, either by removing the excess bits from the right (losing precision...) or by adding extra '0' bits to the right.
  • 9. Sign (it takes 1 bit) is either 1 for a negative or 0 for a positive number.

Example: convert the negative number -25.347 from decimal system (base ten) to 32 bit single precision IEEE 754 binary floating point:

  • 1. Start with the positive version of the number:

    |-25.347| = 25.347

  • 2. First convert the integer part, 25. Divide it repeatedly by 2, keeping track of each remainder, until we get a quotient that is equal to zero:
    • division = quotient + remainder;
    • 25 ÷ 2 = 12 + 1;
    • 12 ÷ 2 = 6 + 0;
    • 6 ÷ 2 = 3 + 0;
    • 3 ÷ 2 = 1 + 1;
    • 1 ÷ 2 = 0 + 1;
    • We have encountered a quotient that is ZERO => FULL STOP
  • 3. Construct the base 2 representation of the integer part of the number by taking all the remainders of the previous dividing operations, starting from the bottom of the list constructed above:

    25(10) = 1 1001(2)

  • 4. Then convert the fractional part, 0.347. Multiply repeatedly by 2, keeping track of each integer part of the results, until we get a fractional part that is equal to zero:
    • #) multiplying = integer + fractional part;
    • 1) 0.347 × 2 = 0 + 0.694;
    • 2) 0.694 × 2 = 1 + 0.388;
    • 3) 0.388 × 2 = 0 + 0.776;
    • 4) 0.776 × 2 = 1 + 0.552;
    • 5) 0.552 × 2 = 1 + 0.104;
    • 6) 0.104 × 2 = 0 + 0.208;
    • 7) 0.208 × 2 = 0 + 0.416;
    • 8) 0.416 × 2 = 0 + 0.832;
    • 9) 0.832 × 2 = 1 + 0.664;
    • 10) 0.664 × 2 = 1 + 0.328;
    • 11) 0.328 × 2 = 0 + 0.656;
    • 12) 0.656 × 2 = 1 + 0.312;
    • 13) 0.312 × 2 = 0 + 0.624;
    • 14) 0.624 × 2 = 1 + 0.248;
    • 15) 0.248 × 2 = 0 + 0.496;
    • 16) 0.496 × 2 = 0 + 0.992;
    • 17) 0.992 × 2 = 1 + 0.984;
    • 18) 0.984 × 2 = 1 + 0.968;
    • 19) 0.968 × 2 = 1 + 0.936;
    • 20) 0.936 × 2 = 1 + 0.872;
    • 21) 0.872 × 2 = 1 + 0.744;
    • 22) 0.744 × 2 = 1 + 0.488;
    • 23) 0.488 × 2 = 0 + 0.976;
    • 24) 0.976 × 2 = 1 + 0.952;
    • We didn't get any fractional part that was equal to zero. But we had enough iterations (over Mantissa limit = 23) and at least one integer part that was different from zero => FULL STOP (losing precision...).
  • 5. Construct the base 2 representation of the fractional part of the number, by taking all the integer parts of the previous multiplying operations, starting from the top of the constructed list above:

    0.347(10) = 0.0101 1000 1101 0100 1111 1101(2)

  • 6. Summarizing - the positive number before normalization:

    25.347(10) = 1 1001.0101 1000 1101 0100 1111 1101(2)

  • 7. Normalize the binary representation of the number, shifting the decimal point 4 positions to the left so that only one non-zero digit stays to the left of the decimal point:

    25.347(10) =
    1 1001.0101 1000 1101 0100 1111 1101(2) =
    1 1001.0101 1000 1101 0100 1111 1101(2) × 20 =
    1.1001 0101 1000 1101 0100 1111 1101(2) × 24

  • 8. Up to this moment, there are the following elements that would feed into the 32 bit single precision IEEE 754 binary floating point:

    Sign: 1 (a negative number)

    Exponent (unadjusted): 4

    Mantissa (not-normalized): 1.1001 0101 1000 1101 0100 1111 1101

  • 9. Adjust the exponent in 8 bit excess/bias notation and then convert it from decimal (base 10) to 8 bit binary (base 2), by using the same technique of repeatedly dividing it by 2, as already demonstrated above:

    Exponent (adjusted) = Exponent (unadjusted) + 2(8-1) - 1 = (4 + 127)(10) = 131(10) =
    1000 0011(2)

  • 10. Normalize the mantissa, remove the leading (leftmost) bit, since it's allways '1' (and the decimal point) and adjust its length to 23 bits, by removing the excess bits from the right (losing precision...):

    Mantissa (not-normalized): 1.1001 0101 1000 1101 0100 1111 1101

    Mantissa (normalized): 100 1010 1100 0110 1010 0111

  • Conclusion:

    Sign (1 bit) = 1 (a negative number)

    Exponent (8 bits) = 1000 0011

    Mantissa (23 bits) = 100 1010 1100 0110 1010 0111

  • Number -25.347, converted from the decimal system (base 10) to 32 bit single precision IEEE 754 binary floating point =
    1 - 1000 0011 - 100 1010 1100 0110 1010 0111