32bit IEEE 754: Decimal ↗ Single Precision Floating Point Binary: 5.752 18 Convert the Number to 32 Bit Single Precision IEEE 754 Binary Floating Point Representation Standard, From a Base 10 Decimal System Number

Number 5.752 18(10) converted and written in 32 bit single precision IEEE 754 binary floating point representation (1 bit for sign, 8 bits for exponent, 23 bits for mantissa)

1. First, convert to binary (in base 2) the integer part: 5.
Divide the number repeatedly by 2.

Keep track of each remainder.

We stop when we get a quotient that is equal to zero.


  • division = quotient + remainder;
  • 5 ÷ 2 = 2 + 1;
  • 2 ÷ 2 = 1 + 0;
  • 1 ÷ 2 = 0 + 1;

2. Construct the base 2 representation of the integer part of the number.

Take all the remainders starting from the bottom of the list constructed above.


5(10) =

101(2)


3. Convert to binary (base 2) the fractional part: 0.752 18.

Multiply it repeatedly by 2.

Keep track of each integer part of the results.

Stop when we get a fractional part that is equal to zero.


  • #) multiplying = integer + fractional part;
  • 1) 0.752 18 × 2 = 1 + 0.504 36;
  • 2) 0.504 36 × 2 = 1 + 0.008 72;
  • 3) 0.008 72 × 2 = 0 + 0.017 44;
  • 4) 0.017 44 × 2 = 0 + 0.034 88;
  • 5) 0.034 88 × 2 = 0 + 0.069 76;
  • 6) 0.069 76 × 2 = 0 + 0.139 52;
  • 7) 0.139 52 × 2 = 0 + 0.279 04;
  • 8) 0.279 04 × 2 = 0 + 0.558 08;
  • 9) 0.558 08 × 2 = 1 + 0.116 16;
  • 10) 0.116 16 × 2 = 0 + 0.232 32;
  • 11) 0.232 32 × 2 = 0 + 0.464 64;
  • 12) 0.464 64 × 2 = 0 + 0.929 28;
  • 13) 0.929 28 × 2 = 1 + 0.858 56;
  • 14) 0.858 56 × 2 = 1 + 0.717 12;
  • 15) 0.717 12 × 2 = 1 + 0.434 24;
  • 16) 0.434 24 × 2 = 0 + 0.868 48;
  • 17) 0.868 48 × 2 = 1 + 0.736 96;
  • 18) 0.736 96 × 2 = 1 + 0.473 92;
  • 19) 0.473 92 × 2 = 0 + 0.947 84;
  • 20) 0.947 84 × 2 = 1 + 0.895 68;
  • 21) 0.895 68 × 2 = 1 + 0.791 36;
  • 22) 0.791 36 × 2 = 1 + 0.582 72;
  • 23) 0.582 72 × 2 = 1 + 0.165 44;
  • 24) 0.165 44 × 2 = 0 + 0.330 88;

We didn't get any fractional part that was equal to zero. But we had enough iterations (over Mantissa limit) and at least one integer that was different from zero => FULL STOP (losing precision...)


4. Construct the base 2 representation of the fractional part of the number.

Take all the integer parts of the multiplying operations, starting from the top of the constructed list above:


0.752 18(10) =

0.1100 0000 1000 1110 1101 1110(2)


5. Positive number before normalization:

5.752 18(10) =

101.1100 0000 1000 1110 1101 1110(2)

6. Normalize the binary representation of the number.

Shift the decimal mark 2 positions to the left, so that only one non zero digit remains to the left of it:


5.752 18(10) =

101.1100 0000 1000 1110 1101 1110(2) =

101.1100 0000 1000 1110 1101 1110(2) × 20 =

1.0111 0000 0010 0011 1011 0111 10(2) × 22


7. Up to this moment, there are the following elements that would feed into the 32 bit single precision IEEE 754 binary floating point representation:

Sign 0 (a positive number)

Exponent (unadjusted): 2

Mantissa (not normalized):
1.0111 0000 0010 0011 1011 0111 10


8. Adjust the exponent.

Use the 8 bit excess/bias notation:


Exponent (adjusted) =

Exponent (unadjusted) + 2(8-1) - 1 =

2 + 2(8-1) - 1 =

(2 + 127)(10) =

129(10)


9. Convert the adjusted exponent from the decimal (base 10) to 8 bit binary.

Use the same technique of repeatedly dividing by 2:


  • division = quotient + remainder;
  • 129 ÷ 2 = 64 + 1;
  • 64 ÷ 2 = 32 + 0;
  • 32 ÷ 2 = 16 + 0;
  • 16 ÷ 2 = 8 + 0;
  • 8 ÷ 2 = 4 + 0;
  • 4 ÷ 2 = 2 + 0;
  • 2 ÷ 2 = 1 + 0;
  • 1 ÷ 2 = 0 + 1;

10. Construct the base 2 representation of the adjusted exponent.

Take all the remainders starting from the bottom of the list constructed above.


Exponent (adjusted) =

129(10) =

1000 0001(2)


11. Normalize the mantissa.

a) Remove the leading (the leftmost) bit, since it's allways 1, and the decimal point, if the case.

b) Adjust its length to 23 bits, by removing the excess bits, from the right (if any of the excess bits is set on 1, we are losing precision...).


Mantissa (normalized) =

1. 011 1000 0001 0001 1101 1011 110 =

011 1000 0001 0001 1101 1011


12. The three elements that make up the number's 32 bit single precision IEEE 754 binary floating point representation:

Sign (1 bit) =
0 (a positive number)

Exponent (8 bits) =
1000 0001

Mantissa (23 bits) =
011 1000 0001 0001 1101 1011


The base ten decimal number 5.752 18 converted and written in 32 bit single precision IEEE 754 binary floating point representation:
0 - 1000 0001 - 011 1000 0001 0001 1101 1011

More operations with decimal numbers converted to 32 bit single precision IEEE 754 binary floating point representation:

» Number 5.752 17 converted from decimal system (base 10) to 32 bit single precision IEEE 754 binary floating point representation = ?

» Number 5.752 19 converted from decimal system (base 10) to 32 bit single precision IEEE 754 binary floating point representation = ?

The latest decimal numbers converted from base ten to 32 bit single precision IEEE 754 floating point binary standard representation

Number 1 039 421 657 converted from decimal system (written in base ten) to 32 bit single precision IEEE 754 binary floating point representation standard May 01 07:47 UTC (GMT)
Number -15 185 converted from decimal system (written in base ten) to 32 bit single precision IEEE 754 binary floating point representation standard May 01 07:47 UTC (GMT)
Number 3.295 7 converted from decimal system (written in base ten) to 32 bit single precision IEEE 754 binary floating point representation standard May 01 07:47 UTC (GMT)
Number -4 093 640 682 converted from decimal system (written in base ten) to 32 bit single precision IEEE 754 binary floating point representation standard May 01 07:47 UTC (GMT)
Number 1 018 448 484 642 converted from decimal system (written in base ten) to 32 bit single precision IEEE 754 binary floating point representation standard May 01 07:47 UTC (GMT)
Number 1 113 283 converted from decimal system (written in base ten) to 32 bit single precision IEEE 754 binary floating point representation standard May 01 07:47 UTC (GMT)
Number 11 001 100 010 010 999 999 999 999 999 992 converted from decimal system (written in base ten) to 32 bit single precision IEEE 754 binary floating point representation standard May 01 07:47 UTC (GMT)
Number -12 595 277 converted from decimal system (written in base ten) to 32 bit single precision IEEE 754 binary floating point representation standard May 01 07:47 UTC (GMT)
Number -1 054 101 converted from decimal system (written in base ten) to 32 bit single precision IEEE 754 binary floating point representation standard May 01 07:47 UTC (GMT)
Number -183.859 1 converted from decimal system (written in base ten) to 32 bit single precision IEEE 754 binary floating point representation standard May 01 07:47 UTC (GMT)
All base ten decimal numbers converted to 32 bit single precision IEEE 754 binary floating point

How to convert decimal numbers from base ten to 32 bit single precision IEEE 754 binary floating point standard

Follow the steps below to convert a base 10 decimal number to 32 bit single precision IEEE 754 binary floating point:

  • 1. If the number to be converted is negative, start with its the positive version.
  • 2. First convert the integer part. Divide repeatedly by 2 the base ten positive representation of the integer number that is to be converted to binary, until we get a quotient that is equal to zero, keeping track of each remainder.
  • 3. Construct the base 2 representation of the positive integer part of the number, by taking all the remainders of the previous dividing operations, starting from the bottom of the list constructed above. Thus, the last remainder of the divisions becomes the first symbol (the leftmost) of the base two number, while the first remainder becomes the last symbol (the rightmost).
  • 4. Then convert the fractional part. Multiply the number repeatedly by 2, until we get a fractional part that is equal to zero, keeping track of each integer part of the results.
  • 5. Construct the base 2 representation of the fractional part of the number by taking all the integer parts of the previous multiplying operations, starting from the top of the constructed list above (they should appear in the binary representation, from left to right, in the order they have been calculated).
  • 6. Normalize the binary representation of the number, by shifting the decimal point (or if you prefer, the decimal mark) "n" positions either to the left or to the right, so that only one non zero digit remains to the left of the decimal point.
  • 7. Adjust the exponent in 8 bit excess/bias notation and then convert it from decimal (base 10) to 8 bit binary, by using the same technique of repeatedly dividing by 2, as shown above:
    Exponent (adjusted) = Exponent (unadjusted) + 2(8-1) - 1
  • 8. Normalize mantissa, remove the leading (leftmost) bit, since it's allways '1' (and the decimal sign if the case) and adjust its length to 23 bits, either by removing the excess bits from the right (losing precision...) or by adding extra '0' bits to the right.
  • 9. Sign (it takes 1 bit) is either 1 for a negative or 0 for a positive number.

Example: convert the negative number -25.347 from decimal system (base ten) to 32 bit single precision IEEE 754 binary floating point:

  • 1. Start with the positive version of the number:

    |-25.347| = 25.347

  • 2. First convert the integer part, 25. Divide it repeatedly by 2, keeping track of each remainder, until we get a quotient that is equal to zero:
    • division = quotient + remainder;
    • 25 ÷ 2 = 12 + 1;
    • 12 ÷ 2 = 6 + 0;
    • 6 ÷ 2 = 3 + 0;
    • 3 ÷ 2 = 1 + 1;
    • 1 ÷ 2 = 0 + 1;
    • We have encountered a quotient that is ZERO => FULL STOP
  • 3. Construct the base 2 representation of the integer part of the number by taking all the remainders of the previous dividing operations, starting from the bottom of the list constructed above:

    25(10) = 1 1001(2)

  • 4. Then convert the fractional part, 0.347. Multiply repeatedly by 2, keeping track of each integer part of the results, until we get a fractional part that is equal to zero:
    • #) multiplying = integer + fractional part;
    • 1) 0.347 × 2 = 0 + 0.694;
    • 2) 0.694 × 2 = 1 + 0.388;
    • 3) 0.388 × 2 = 0 + 0.776;
    • 4) 0.776 × 2 = 1 + 0.552;
    • 5) 0.552 × 2 = 1 + 0.104;
    • 6) 0.104 × 2 = 0 + 0.208;
    • 7) 0.208 × 2 = 0 + 0.416;
    • 8) 0.416 × 2 = 0 + 0.832;
    • 9) 0.832 × 2 = 1 + 0.664;
    • 10) 0.664 × 2 = 1 + 0.328;
    • 11) 0.328 × 2 = 0 + 0.656;
    • 12) 0.656 × 2 = 1 + 0.312;
    • 13) 0.312 × 2 = 0 + 0.624;
    • 14) 0.624 × 2 = 1 + 0.248;
    • 15) 0.248 × 2 = 0 + 0.496;
    • 16) 0.496 × 2 = 0 + 0.992;
    • 17) 0.992 × 2 = 1 + 0.984;
    • 18) 0.984 × 2 = 1 + 0.968;
    • 19) 0.968 × 2 = 1 + 0.936;
    • 20) 0.936 × 2 = 1 + 0.872;
    • 21) 0.872 × 2 = 1 + 0.744;
    • 22) 0.744 × 2 = 1 + 0.488;
    • 23) 0.488 × 2 = 0 + 0.976;
    • 24) 0.976 × 2 = 1 + 0.952;
    • We didn't get any fractional part that was equal to zero. But we had enough iterations (over Mantissa limit = 23) and at least one integer part that was different from zero => FULL STOP (losing precision...).
  • 5. Construct the base 2 representation of the fractional part of the number, by taking all the integer parts of the previous multiplying operations, starting from the top of the constructed list above:

    0.347(10) = 0.0101 1000 1101 0100 1111 1101(2)

  • 6. Summarizing - the positive number before normalization:

    25.347(10) = 1 1001.0101 1000 1101 0100 1111 1101(2)

  • 7. Normalize the binary representation of the number, shifting the decimal point 4 positions to the left so that only one non-zero digit stays to the left of the decimal point:

    25.347(10) =
    1 1001.0101 1000 1101 0100 1111 1101(2) =
    1 1001.0101 1000 1101 0100 1111 1101(2) × 20 =
    1.1001 0101 1000 1101 0100 1111 1101(2) × 24

  • 8. Up to this moment, there are the following elements that would feed into the 32 bit single precision IEEE 754 binary floating point:

    Sign: 1 (a negative number)

    Exponent (unadjusted): 4

    Mantissa (not-normalized): 1.1001 0101 1000 1101 0100 1111 1101

  • 9. Adjust the exponent in 8 bit excess/bias notation and then convert it from decimal (base 10) to 8 bit binary (base 2), by using the same technique of repeatedly dividing it by 2, as already demonstrated above:

    Exponent (adjusted) = Exponent (unadjusted) + 2(8-1) - 1 = (4 + 127)(10) = 131(10) =
    1000 0011(2)

  • 10. Normalize the mantissa, remove the leading (leftmost) bit, since it's allways '1' (and the decimal point) and adjust its length to 23 bits, by removing the excess bits from the right (losing precision...):

    Mantissa (not-normalized): 1.1001 0101 1000 1101 0100 1111 1101

    Mantissa (normalized): 100 1010 1100 0110 1010 0111

  • Conclusion:

    Sign (1 bit) = 1 (a negative number)

    Exponent (8 bits) = 1000 0011

    Mantissa (23 bits) = 100 1010 1100 0110 1010 0111

  • Number -25.347, converted from the decimal system (base 10) to 32 bit single precision IEEE 754 binary floating point =
    1 - 1000 0011 - 100 1010 1100 0110 1010 0111