0.282 760 818 53 Converted to 32 Bit Single Precision IEEE 754 Binary Floating Point Representation Standard

Convert decimal 0.282 760 818 53(10) to 32 bit single precision IEEE 754 binary floating point representation standard (1 bit for sign, 8 bits for exponent, 23 bits for mantissa)

What are the steps to convert decimal number
0.282 760 818 53(10) to 32 bit single precision IEEE 754 binary floating point representation (1 bit for sign, 8 bits for exponent, 23 bits for mantissa)

1. First, convert to binary (in base 2) the integer part: 0.
Divide the number repeatedly by 2.

Keep track of each remainder.

We stop when we get a quotient that is equal to zero.


  • division = quotient + remainder;
  • 0 ÷ 2 = 0 + 0;

2. Construct the base 2 representation of the integer part of the number.

Take all the remainders starting from the bottom of the list constructed above.

0(10) =

0(2)


3. Convert to binary (base 2) the fractional part: 0.282 760 818 53.

Multiply it repeatedly by 2.

Keep track of each integer part of the results.

Stop when we get a fractional part that is equal to zero.


  • #) multiplying = integer + fractional part;
  • 1) 0.282 760 818 53 × 2 = 0 + 0.565 521 637 06;
  • 2) 0.565 521 637 06 × 2 = 1 + 0.131 043 274 12;
  • 3) 0.131 043 274 12 × 2 = 0 + 0.262 086 548 24;
  • 4) 0.262 086 548 24 × 2 = 0 + 0.524 173 096 48;
  • 5) 0.524 173 096 48 × 2 = 1 + 0.048 346 192 96;
  • 6) 0.048 346 192 96 × 2 = 0 + 0.096 692 385 92;
  • 7) 0.096 692 385 92 × 2 = 0 + 0.193 384 771 84;
  • 8) 0.193 384 771 84 × 2 = 0 + 0.386 769 543 68;
  • 9) 0.386 769 543 68 × 2 = 0 + 0.773 539 087 36;
  • 10) 0.773 539 087 36 × 2 = 1 + 0.547 078 174 72;
  • 11) 0.547 078 174 72 × 2 = 1 + 0.094 156 349 44;
  • 12) 0.094 156 349 44 × 2 = 0 + 0.188 312 698 88;
  • 13) 0.188 312 698 88 × 2 = 0 + 0.376 625 397 76;
  • 14) 0.376 625 397 76 × 2 = 0 + 0.753 250 795 52;
  • 15) 0.753 250 795 52 × 2 = 1 + 0.506 501 591 04;
  • 16) 0.506 501 591 04 × 2 = 1 + 0.013 003 182 08;
  • 17) 0.013 003 182 08 × 2 = 0 + 0.026 006 364 16;
  • 18) 0.026 006 364 16 × 2 = 0 + 0.052 012 728 32;
  • 19) 0.052 012 728 32 × 2 = 0 + 0.104 025 456 64;
  • 20) 0.104 025 456 64 × 2 = 0 + 0.208 050 913 28;
  • 21) 0.208 050 913 28 × 2 = 0 + 0.416 101 826 56;
  • 22) 0.416 101 826 56 × 2 = 0 + 0.832 203 653 12;
  • 23) 0.832 203 653 12 × 2 = 1 + 0.664 407 306 24;
  • 24) 0.664 407 306 24 × 2 = 1 + 0.328 814 612 48;
  • 25) 0.328 814 612 48 × 2 = 0 + 0.657 629 224 96;

We didn't get any fractional part that was equal to zero. But we had enough iterations (over Mantissa limit) and at least one integer that was different from zero => FULL STOP (Losing precision - the converted number we get in the end will be just a very good approximation of the initial one).


4. Construct the base 2 representation of the fractional part of the number.

Take all the integer parts of the multiplying operations, starting from the top of the constructed list above:


0.282 760 818 53(10) =

0.0100 1000 0110 0011 0000 0011 0(2)

5. Positive number before normalization:

0.282 760 818 53(10) =

0.0100 1000 0110 0011 0000 0011 0(2)

6. Normalize the binary representation of the number.

Shift the decimal mark 2 positions to the right, so that only one non zero digit remains to the left of it:


0.282 760 818 53(10) =

0.0100 1000 0110 0011 0000 0011 0(2) =

0.0100 1000 0110 0011 0000 0011 0(2) × 20 =

1.0010 0001 1000 1100 0000 110(2) × 2-2


7. Up to this moment, there are the following elements that would feed into the 32 bit single precision IEEE 754 binary floating point representation:

Sign 0 (a positive number)

Exponent (unadjusted): -2

Mantissa (not normalized):
1.0010 0001 1000 1100 0000 110


8. Adjust the exponent.

Use the 8 bit excess/bias notation:


Exponent (adjusted) =

Exponent (unadjusted) + 2(8-1) - 1 =

-2 + 2(8-1) - 1 =

(-2 + 127)(10) =

125(10)


9. Convert the adjusted exponent from the decimal (base 10) to 8 bit binary.

Use the same technique of repeatedly dividing by 2:


  • division = quotient + remainder;
  • 125 ÷ 2 = 62 + 1;
  • 62 ÷ 2 = 31 + 0;
  • 31 ÷ 2 = 15 + 1;
  • 15 ÷ 2 = 7 + 1;
  • 7 ÷ 2 = 3 + 1;
  • 3 ÷ 2 = 1 + 1;
  • 1 ÷ 2 = 0 + 1;

10. Construct the base 2 representation of the adjusted exponent.

Take all the remainders starting from the bottom of the list constructed above.


Exponent (adjusted) =

125(10) =

0111 1101(2)


11. Normalize the mantissa.

a) Remove the leading (the leftmost) bit, since it's allways 1, and the decimal point, if the case.

b) Adjust its length to 23 bits, only if necessary (not the case here).


Mantissa (normalized) =

1. 001 0000 1100 0110 0000 0110 =

001 0000 1100 0110 0000 0110


12. The three elements that make up the number's 32 bit single precision IEEE 754 binary floating point representation:

Sign (1 bit) =
0 (a positive number)

Exponent (8 bits) =
0111 1101

Mantissa (23 bits) =
001 0000 1100 0110 0000 0110


Decimal number 0.282 760 818 53 converted to 32 bit single precision IEEE 754 binary floating point representation:

0 - 0111 1101 - 001 0000 1100 0110 0000 0110

Share

» Convert decimal 0.282 760 818 54 to 32 bit single precision IEEE 754 binary floating point representation standard

» Calculations Performed by Our Visitors: Decimal Numbers Converted to 32 Bit Single Precision IEEE 754 Binary Floating Point Representation Standard. Data organized on a Monthly Basis

» Month 08, 2026 [August]: Decimal Numbers Converted to 32 Bit Single Precision IEEE 754 Binary Floating Point Representation Standard. Calculations performed during the month of: August - by our visitors

» Improve your social skills: Show, Don’t Tell, the Strategic Power of Action. Gemini Notebook YouTube Video of 9.21 minutes

How to convert decimal numbers from base ten to 32 bit single precision IEEE 754 binary floating point standard

Follow the steps below to convert a base 10 decimal number to 32 bit single precision IEEE 754 binary floating point:

  • 1. If the number to be converted is negative, start with its the positive version.
  • 2. First convert the integer part. Divide repeatedly by 2 the base ten positive representation of the integer number that is to be converted to binary, until we get a quotient that is equal to zero, keeping track of each remainder.
  • 3. Construct the base 2 representation of the positive integer part of the number, by taking all the remainders of the previous dividing operations, starting from the bottom of the list constructed above. Thus, the last remainder of the divisions becomes the first symbol (the leftmost) of the base two number, while the first remainder becomes the last symbol (the rightmost).
  • 4. Then convert the fractional part. Multiply the number repeatedly by 2, until we get a fractional part that is equal to zero, keeping track of each integer part of the results.
  • 5. Construct the base 2 representation of the fractional part of the number by taking all the integer parts of the previous multiplying operations, starting from the top of the constructed list above (they should appear in the binary representation, from left to right, in the order they have been calculated).
  • 6. Normalize the binary representation of the number, by shifting the decimal point (or if you prefer, the decimal mark) "n" positions either to the left or to the right, so that only one non zero digit remains to the left of the decimal point.
  • 7. Adjust the exponent in 8 bit excess/bias notation and then convert it from decimal (base 10) to 8 bit binary, by using the same technique of repeatedly dividing by 2, as shown above:
    Exponent (adjusted) = Exponent (unadjusted) + 2(8-1) - 1
  • 8. Normalize mantissa, remove the leading (leftmost) bit, since it's allways '1' (and the decimal sign if the case) and adjust its length to 23 bits, either by removing the excess bits from the right (losing precision...) or by adding extra '0' bits to the right.
  • 9. Sign (it takes 1 bit) is either 1 for a negative or 0 for a positive number.

Example: convert the negative number -25.347 from decimal system (base ten) to 32 bit single precision IEEE 754 binary floating point:

  • 1. Start with the positive version of the number:

    |-25.347| = 25.347

  • 2. First convert the integer part, 25. Divide it repeatedly by 2, keeping track of each remainder, until we get a quotient that is equal to zero:
    • division = quotient + remainder;
    • 25 ÷ 2 = 12 + 1;
    • 12 ÷ 2 = 6 + 0;
    • 6 ÷ 2 = 3 + 0;
    • 3 ÷ 2 = 1 + 1;
    • 1 ÷ 2 = 0 + 1;
    • We have encountered a quotient that is ZERO => FULL STOP
  • 3. Construct the base 2 representation of the integer part of the number by taking all the remainders of the previous dividing operations, starting from the bottom of the list constructed above:

    25(10) = 1 1001(2)

  • 4. Then convert the fractional part, 0.347. Multiply repeatedly by 2, keeping track of each integer part of the results, until we get a fractional part that is equal to zero:
    • #) multiplying = integer + fractional part;
    • 1) 0.347 × 2 = 0 + 0.694;
    • 2) 0.694 × 2 = 1 + 0.388;
    • 3) 0.388 × 2 = 0 + 0.776;
    • 4) 0.776 × 2 = 1 + 0.552;
    • 5) 0.552 × 2 = 1 + 0.104;
    • 6) 0.104 × 2 = 0 + 0.208;
    • 7) 0.208 × 2 = 0 + 0.416;
    • 8) 0.416 × 2 = 0 + 0.832;
    • 9) 0.832 × 2 = 1 + 0.664;
    • 10) 0.664 × 2 = 1 + 0.328;
    • 11) 0.328 × 2 = 0 + 0.656;
    • 12) 0.656 × 2 = 1 + 0.312;
    • 13) 0.312 × 2 = 0 + 0.624;
    • 14) 0.624 × 2 = 1 + 0.248;
    • 15) 0.248 × 2 = 0 + 0.496;
    • 16) 0.496 × 2 = 0 + 0.992;
    • 17) 0.992 × 2 = 1 + 0.984;
    • 18) 0.984 × 2 = 1 + 0.968;
    • 19) 0.968 × 2 = 1 + 0.936;
    • 20) 0.936 × 2 = 1 + 0.872;
    • 21) 0.872 × 2 = 1 + 0.744;
    • 22) 0.744 × 2 = 1 + 0.488;
    • 23) 0.488 × 2 = 0 + 0.976;
    • 24) 0.976 × 2 = 1 + 0.952;
    • We didn't get any fractional part that was equal to zero. But we had enough iterations (over Mantissa limit = 23) and at least one integer part that was different from zero => FULL STOP (losing precision...).
  • 5. Construct the base 2 representation of the fractional part of the number, by taking all the integer parts of the previous multiplying operations, starting from the top of the constructed list above:

    0.347(10) = 0.0101 1000 1101 0100 1111 1101(2)

  • 6. Summarizing - the positive number before normalization:

    25.347(10) = 1 1001.0101 1000 1101 0100 1111 1101(2)

  • 7. Normalize the binary representation of the number, shifting the decimal point 4 positions to the left so that only one non-zero digit stays to the left of the decimal point:

    25.347(10) =
    1 1001.0101 1000 1101 0100 1111 1101(2) =
    1 1001.0101 1000 1101 0100 1111 1101(2) × 20 =
    1.1001 0101 1000 1101 0100 1111 1101(2) × 24

  • 8. Up to this moment, there are the following elements that would feed into the 32 bit single precision IEEE 754 binary floating point:

    Sign: 1 (a negative number)

    Exponent (unadjusted): 4

    Mantissa (not-normalized): 1.1001 0101 1000 1101 0100 1111 1101

  • 9. Adjust the exponent in 8 bit excess/bias notation and then convert it from decimal (base 10) to 8 bit binary (base 2), by using the same technique of repeatedly dividing it by 2, as already demonstrated above:

    Exponent (adjusted) = Exponent (unadjusted) + 2(8-1) - 1 = (4 + 127)(10) = 131(10) =
    1000 0011(2)

  • 10. Normalize the mantissa, remove the leading (leftmost) bit, since it's allways '1' (and the decimal point) and adjust its length to 23 bits, by removing the excess bits from the right (losing precision...):

    Mantissa (not-normalized): 1.1001 0101 1000 1101 0100 1111 1101

    Mantissa (normalized): 100 1010 1100 0110 1010 0111

  • Conclusion:

    Sign (1 bit) = 1 (a negative number)

    Exponent (8 bits) = 1000 0011

    Mantissa (23 bits) = 100 1010 1100 0110 1010 0111

  • Number -25.347, converted from the decimal system (base 10) to 32 bit single precision IEEE 754 binary floating point =
    1 - 1000 0011 - 100 1010 1100 0110 1010 0111