32bit IEEE 754: Decimal ↗ Single Precision Floating Point Binary: 498.554 685 Convert the Number to 32 Bit Single Precision IEEE 754 Binary Floating Point Representation Standard, From a Base 10 Decimal System Number

Number 498.554 685(10) converted and written in 32 bit single precision IEEE 754 binary floating point representation (1 bit for sign, 8 bits for exponent, 23 bits for mantissa)

1. First, convert to binary (in base 2) the integer part: 498.
Divide the number repeatedly by 2.

Keep track of each remainder.

We stop when we get a quotient that is equal to zero.


  • division = quotient + remainder;
  • 498 ÷ 2 = 249 + 0;
  • 249 ÷ 2 = 124 + 1;
  • 124 ÷ 2 = 62 + 0;
  • 62 ÷ 2 = 31 + 0;
  • 31 ÷ 2 = 15 + 1;
  • 15 ÷ 2 = 7 + 1;
  • 7 ÷ 2 = 3 + 1;
  • 3 ÷ 2 = 1 + 1;
  • 1 ÷ 2 = 0 + 1;

2. Construct the base 2 representation of the integer part of the number.

Take all the remainders starting from the bottom of the list constructed above.


498(10) =

1 1111 0010(2)


3. Convert to binary (base 2) the fractional part: 0.554 685.

Multiply it repeatedly by 2.

Keep track of each integer part of the results.

Stop when we get a fractional part that is equal to zero.


  • #) multiplying = integer + fractional part;
  • 1) 0.554 685 × 2 = 1 + 0.109 37;
  • 2) 0.109 37 × 2 = 0 + 0.218 74;
  • 3) 0.218 74 × 2 = 0 + 0.437 48;
  • 4) 0.437 48 × 2 = 0 + 0.874 96;
  • 5) 0.874 96 × 2 = 1 + 0.749 92;
  • 6) 0.749 92 × 2 = 1 + 0.499 84;
  • 7) 0.499 84 × 2 = 0 + 0.999 68;
  • 8) 0.999 68 × 2 = 1 + 0.999 36;
  • 9) 0.999 36 × 2 = 1 + 0.998 72;
  • 10) 0.998 72 × 2 = 1 + 0.997 44;
  • 11) 0.997 44 × 2 = 1 + 0.994 88;
  • 12) 0.994 88 × 2 = 1 + 0.989 76;
  • 13) 0.989 76 × 2 = 1 + 0.979 52;
  • 14) 0.979 52 × 2 = 1 + 0.959 04;
  • 15) 0.959 04 × 2 = 1 + 0.918 08;
  • 16) 0.918 08 × 2 = 1 + 0.836 16;
  • 17) 0.836 16 × 2 = 1 + 0.672 32;
  • 18) 0.672 32 × 2 = 1 + 0.344 64;
  • 19) 0.344 64 × 2 = 0 + 0.689 28;
  • 20) 0.689 28 × 2 = 1 + 0.378 56;
  • 21) 0.378 56 × 2 = 0 + 0.757 12;
  • 22) 0.757 12 × 2 = 1 + 0.514 24;
  • 23) 0.514 24 × 2 = 1 + 0.028 48;
  • 24) 0.028 48 × 2 = 0 + 0.056 96;

We didn't get any fractional part that was equal to zero. But we had enough iterations (over Mantissa limit) and at least one integer that was different from zero => FULL STOP (losing precision...)


4. Construct the base 2 representation of the fractional part of the number.

Take all the integer parts of the multiplying operations, starting from the top of the constructed list above:


0.554 685(10) =

0.1000 1101 1111 1111 1101 0110(2)


5. Positive number before normalization:

498.554 685(10) =

1 1111 0010.1000 1101 1111 1111 1101 0110(2)

6. Normalize the binary representation of the number.

Shift the decimal mark 8 positions to the left, so that only one non zero digit remains to the left of it:


498.554 685(10) =

1 1111 0010.1000 1101 1111 1111 1101 0110(2) =

1 1111 0010.1000 1101 1111 1111 1101 0110(2) × 20 =

1.1111 0010 1000 1101 1111 1111 1101 0110(2) × 28


7. Up to this moment, there are the following elements that would feed into the 32 bit single precision IEEE 754 binary floating point representation:

Sign 0 (a positive number)

Exponent (unadjusted): 8

Mantissa (not normalized):
1.1111 0010 1000 1101 1111 1111 1101 0110


8. Adjust the exponent.

Use the 8 bit excess/bias notation:


Exponent (adjusted) =

Exponent (unadjusted) + 2(8-1) - 1 =

8 + 2(8-1) - 1 =

(8 + 127)(10) =

135(10)


9. Convert the adjusted exponent from the decimal (base 10) to 8 bit binary.

Use the same technique of repeatedly dividing by 2:


  • division = quotient + remainder;
  • 135 ÷ 2 = 67 + 1;
  • 67 ÷ 2 = 33 + 1;
  • 33 ÷ 2 = 16 + 1;
  • 16 ÷ 2 = 8 + 0;
  • 8 ÷ 2 = 4 + 0;
  • 4 ÷ 2 = 2 + 0;
  • 2 ÷ 2 = 1 + 0;
  • 1 ÷ 2 = 0 + 1;

10. Construct the base 2 representation of the adjusted exponent.

Take all the remainders starting from the bottom of the list constructed above.


Exponent (adjusted) =

135(10) =

1000 0111(2)


11. Normalize the mantissa.

a) Remove the leading (the leftmost) bit, since it's allways 1, and the decimal point, if the case.

b) Adjust its length to 23 bits, by removing the excess bits, from the right (if any of the excess bits is set on 1, we are losing precision...).


Mantissa (normalized) =

1. 111 1001 0100 0110 1111 1111 1 1101 0110 =

111 1001 0100 0110 1111 1111


12. The three elements that make up the number's 32 bit single precision IEEE 754 binary floating point representation:

Sign (1 bit) =
0 (a positive number)

Exponent (8 bits) =
1000 0111

Mantissa (23 bits) =
111 1001 0100 0110 1111 1111


The base ten decimal number 498.554 685 converted and written in 32 bit single precision IEEE 754 binary floating point representation:
0 - 1000 0111 - 111 1001 0100 0110 1111 1111

More operations with decimal numbers converted to 32 bit single precision IEEE 754 binary floating point representation:

» Number 498.554 684 converted from decimal system (base 10) to 32 bit single precision IEEE 754 binary floating point representation = ?

» Number 498.554 686 converted from decimal system (base 10) to 32 bit single precision IEEE 754 binary floating point representation = ?

The latest decimal numbers converted from base ten to 32 bit single precision IEEE 754 floating point binary standard representation

Number -36.031 27 converted from decimal system (written in base ten) to 32 bit single precision IEEE 754 binary floating point representation standard Apr 18 21:05 UTC (GMT)
Number -42.75 converted from decimal system (written in base ten) to 32 bit single precision IEEE 754 binary floating point representation standard Apr 18 21:05 UTC (GMT)
Number 0.000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 047 589 converted from decimal system (written in base ten) to 32 bit single precision IEEE 754 binary floating point representation standard Apr 18 21:04 UTC (GMT)
Number 854 converted from decimal system (written in base ten) to 32 bit single precision IEEE 754 binary floating point representation standard Apr 18 21:04 UTC (GMT)
Number 270.975 converted from decimal system (written in base ten) to 32 bit single precision IEEE 754 binary floating point representation standard Apr 18 21:04 UTC (GMT)
Number -0.000 000 000 000 000 002 335 153 506 863 283 694 converted from decimal system (written in base ten) to 32 bit single precision IEEE 754 binary floating point representation standard Apr 18 21:04 UTC (GMT)
Number 2 109 303 converted from decimal system (written in base ten) to 32 bit single precision IEEE 754 binary floating point representation standard Apr 18 21:04 UTC (GMT)
Number 3.647 460 937 3 converted from decimal system (written in base ten) to 32 bit single precision IEEE 754 binary floating point representation standard Apr 18 21:04 UTC (GMT)
Number 0.785 394 converted from decimal system (written in base ten) to 32 bit single precision IEEE 754 binary floating point representation standard Apr 18 21:04 UTC (GMT)
Number 585 418 converted from decimal system (written in base ten) to 32 bit single precision IEEE 754 binary floating point representation standard Apr 18 21:04 UTC (GMT)
All base ten decimal numbers converted to 32 bit single precision IEEE 754 binary floating point

How to convert decimal numbers from base ten to 32 bit single precision IEEE 754 binary floating point standard

Follow the steps below to convert a base 10 decimal number to 32 bit single precision IEEE 754 binary floating point:

  • 1. If the number to be converted is negative, start with its the positive version.
  • 2. First convert the integer part. Divide repeatedly by 2 the base ten positive representation of the integer number that is to be converted to binary, until we get a quotient that is equal to zero, keeping track of each remainder.
  • 3. Construct the base 2 representation of the positive integer part of the number, by taking all the remainders of the previous dividing operations, starting from the bottom of the list constructed above. Thus, the last remainder of the divisions becomes the first symbol (the leftmost) of the base two number, while the first remainder becomes the last symbol (the rightmost).
  • 4. Then convert the fractional part. Multiply the number repeatedly by 2, until we get a fractional part that is equal to zero, keeping track of each integer part of the results.
  • 5. Construct the base 2 representation of the fractional part of the number by taking all the integer parts of the previous multiplying operations, starting from the top of the constructed list above (they should appear in the binary representation, from left to right, in the order they have been calculated).
  • 6. Normalize the binary representation of the number, by shifting the decimal point (or if you prefer, the decimal mark) "n" positions either to the left or to the right, so that only one non zero digit remains to the left of the decimal point.
  • 7. Adjust the exponent in 8 bit excess/bias notation and then convert it from decimal (base 10) to 8 bit binary, by using the same technique of repeatedly dividing by 2, as shown above:
    Exponent (adjusted) = Exponent (unadjusted) + 2(8-1) - 1
  • 8. Normalize mantissa, remove the leading (leftmost) bit, since it's allways '1' (and the decimal sign if the case) and adjust its length to 23 bits, either by removing the excess bits from the right (losing precision...) or by adding extra '0' bits to the right.
  • 9. Sign (it takes 1 bit) is either 1 for a negative or 0 for a positive number.

Example: convert the negative number -25.347 from decimal system (base ten) to 32 bit single precision IEEE 754 binary floating point:

  • 1. Start with the positive version of the number:

    |-25.347| = 25.347

  • 2. First convert the integer part, 25. Divide it repeatedly by 2, keeping track of each remainder, until we get a quotient that is equal to zero:
    • division = quotient + remainder;
    • 25 ÷ 2 = 12 + 1;
    • 12 ÷ 2 = 6 + 0;
    • 6 ÷ 2 = 3 + 0;
    • 3 ÷ 2 = 1 + 1;
    • 1 ÷ 2 = 0 + 1;
    • We have encountered a quotient that is ZERO => FULL STOP
  • 3. Construct the base 2 representation of the integer part of the number by taking all the remainders of the previous dividing operations, starting from the bottom of the list constructed above:

    25(10) = 1 1001(2)

  • 4. Then convert the fractional part, 0.347. Multiply repeatedly by 2, keeping track of each integer part of the results, until we get a fractional part that is equal to zero:
    • #) multiplying = integer + fractional part;
    • 1) 0.347 × 2 = 0 + 0.694;
    • 2) 0.694 × 2 = 1 + 0.388;
    • 3) 0.388 × 2 = 0 + 0.776;
    • 4) 0.776 × 2 = 1 + 0.552;
    • 5) 0.552 × 2 = 1 + 0.104;
    • 6) 0.104 × 2 = 0 + 0.208;
    • 7) 0.208 × 2 = 0 + 0.416;
    • 8) 0.416 × 2 = 0 + 0.832;
    • 9) 0.832 × 2 = 1 + 0.664;
    • 10) 0.664 × 2 = 1 + 0.328;
    • 11) 0.328 × 2 = 0 + 0.656;
    • 12) 0.656 × 2 = 1 + 0.312;
    • 13) 0.312 × 2 = 0 + 0.624;
    • 14) 0.624 × 2 = 1 + 0.248;
    • 15) 0.248 × 2 = 0 + 0.496;
    • 16) 0.496 × 2 = 0 + 0.992;
    • 17) 0.992 × 2 = 1 + 0.984;
    • 18) 0.984 × 2 = 1 + 0.968;
    • 19) 0.968 × 2 = 1 + 0.936;
    • 20) 0.936 × 2 = 1 + 0.872;
    • 21) 0.872 × 2 = 1 + 0.744;
    • 22) 0.744 × 2 = 1 + 0.488;
    • 23) 0.488 × 2 = 0 + 0.976;
    • 24) 0.976 × 2 = 1 + 0.952;
    • We didn't get any fractional part that was equal to zero. But we had enough iterations (over Mantissa limit = 23) and at least one integer part that was different from zero => FULL STOP (losing precision...).
  • 5. Construct the base 2 representation of the fractional part of the number, by taking all the integer parts of the previous multiplying operations, starting from the top of the constructed list above:

    0.347(10) = 0.0101 1000 1101 0100 1111 1101(2)

  • 6. Summarizing - the positive number before normalization:

    25.347(10) = 1 1001.0101 1000 1101 0100 1111 1101(2)

  • 7. Normalize the binary representation of the number, shifting the decimal point 4 positions to the left so that only one non-zero digit stays to the left of the decimal point:

    25.347(10) =
    1 1001.0101 1000 1101 0100 1111 1101(2) =
    1 1001.0101 1000 1101 0100 1111 1101(2) × 20 =
    1.1001 0101 1000 1101 0100 1111 1101(2) × 24

  • 8. Up to this moment, there are the following elements that would feed into the 32 bit single precision IEEE 754 binary floating point:

    Sign: 1 (a negative number)

    Exponent (unadjusted): 4

    Mantissa (not-normalized): 1.1001 0101 1000 1101 0100 1111 1101

  • 9. Adjust the exponent in 8 bit excess/bias notation and then convert it from decimal (base 10) to 8 bit binary (base 2), by using the same technique of repeatedly dividing it by 2, as already demonstrated above:

    Exponent (adjusted) = Exponent (unadjusted) + 2(8-1) - 1 = (4 + 127)(10) = 131(10) =
    1000 0011(2)

  • 10. Normalize the mantissa, remove the leading (leftmost) bit, since it's allways '1' (and the decimal point) and adjust its length to 23 bits, by removing the excess bits from the right (losing precision...):

    Mantissa (not-normalized): 1.1001 0101 1000 1101 0100 1111 1101

    Mantissa (normalized): 100 1010 1100 0110 1010 0111

  • Conclusion:

    Sign (1 bit) = 1 (a negative number)

    Exponent (8 bits) = 1000 0011

    Mantissa (23 bits) = 100 1010 1100 0110 1010 0111

  • Number -25.347, converted from the decimal system (base 10) to 32 bit single precision IEEE 754 binary floating point =
    1 - 1000 0011 - 100 1010 1100 0110 1010 0111